Err 08
Err 08 - Tare/Zero Command Failed
⚙️ Model Compatibility: Aczet CG, CZ, and Precision Series Balances.
"Err 08" appears when the operator presses the [TARE] or [ZERO] key, but the scale cannot execute the command.
Troubleshooting Steps:
1. Instability: The scale will not tare if the weight reading is fluctuating. Ensure the draft shield is closed and the table is free from vibrations.
2. Capacity Limit: You cannot tare a container that exceeds the maximum capacity of the balance. Use a lighter weighing boat or container.
3. Negative Value: If the scale was already tared with a heavy weight, and that weight is removed (leaving a large negative number), pressing zero may trigger this error. Turn the scale OFF and ON to clear the negative memory.
"Err 08" appears when the operator presses the [TARE] or [ZERO] key, but the scale cannot execute the command.
Troubleshooting Steps:
1. Instability: The scale will not tare if the weight reading is fluctuating. Ensure the draft shield is closed and the table is free from vibrations.
2. Capacity Limit: You cannot tare a container that exceeds the maximum capacity of the balance. Use a lighter weighing boat or container.
3. Negative Value: If the scale was already tared with a heavy weight, and that weight is removed (leaving a large negative number), pressing zero may trigger this error. Turn the scale OFF and ON to clear the negative memory.
Is your scale beyond repair?
Sometimes replacing an aging machine is more cost-effective than fixing it. Explore our wide range of new, high-precision weighing scales.