Measuring Instruments (Water Meters, Bulk Meters, CNG Systems, etc.) - Calibration, Verification, and Stamping by UP Scales

The Legal Metrology Department ensures the accuracy and reliability of measuring instruments used across various industries, including water supply, oil and gas, and transportation. UP Scales, a trusted name in the field, offers comprehensive calibration, verification, and stamping services for all types of measuring instruments, including water meters, bulk meters, CNG systems, and more. Our services ensure that your instruments comply with the standards set by the Legal Metrology Act, 2009, and its associated rules.

Services Offered by UP Scales

→ Calibration

Calibration ensures that your measuring instruments provide accurate measurements. UP Scales uses advanced equipment and follows standardized procedures to calibrate all types of measuring instruments.

→ Verification

Verification involves checking the accuracy of the measuring instrument against legal metrology standards. UP Scales ensures that your instruments meet the required accuracy levels as per the Legal Metrology Act.

→ Stamping

After successful verification, UP Scales provides a calibration verification certificate and applies the Legal Metrology stamp on the instrument. This stamp confirms that the instrument is legally compliant for use in trade and commerce.

Types of Measuring Instruments Serviced by UP Scales

UP Scales provides calibration, verification, and stamping services for the following types of measuring instruments:

Water Meters: Used to measure the volume of water consumed in residential, commercial, and industrial settings.
Bulk Meters: Used to measure the volume of liquids (e.g., petroleum, chemicals) in bulk quantities, commonly used in oil and gas industries.
CNG (Compressed Natural Gas) Systems: Used to measure the quantity of CNG dispensed at fuel stations for vehicles.
Petrol and Diesel Dispensers: Used to measure the volume of fuel dispensed at petrol pumps.
LPG Meters: Used to measure the quantity of liquefied petroleum gas (LPG) dispensed for domestic and commercial use.
Flow Meters: Used to measure the flow rate of liquids or gases in pipelines, commonly used in industries like water supply, oil and gas, and chemical processing.
Tank Lorries and Storage Tanks: Used to measure the quantity of liquids stored or transported in large tanks.
Volumetric Container Filling Machines: Used to fill containers with a predetermined volume of liquid, commonly used in the food and beverage industry.
Clinical Thermometers: Used to measure body temperature in medical settings.
Sphygmomanometers (Blood Pressure Monitors): Used to measure blood pressure in medical settings.
Taximeters: Used to calculate the fare in taxis based on distance traveled.

Fees for Calibration, Verification, and Stamping

The fees for calibration, verification, and stamping services are as per the Legal Metrology (General) Rules, 2011, and are based on the type and capacity of the measuring instrument. Below is a summary of the fees for various types of measuring instruments:

Type of Measuring Instrument	Capacity	Fee (in INR)
Water Meters	Up to 25 mm	50
	25 mm to 50 mm	100
	Above 50 mm	200
Bulk Meters	Up to 1000 liters	300
	Above 1000 liters	500
CNG Systems	Per dispenser	500
Petrol and Diesel Dispensers	Per nozzle	200
LPG Meters	Per meter	150
Flow Meters	Up to 50 mm	250
	Above 50 mm	400
Tank Lorries and Storage Tanks	Up to 10,000 liters	1000
	Above 10,000 liters	1500
Volumetric Container Filling Machines	Per machine	300
Clinical Thermometers	Per thermometer	20
Sphygmomanometers (Blood Pressure Monitors)	Per monitor	50
Taximeters	Per taximeter	100

Note: The above fees are indicative and may vary based on the specific requirements and location. For detailed fee structures, please refer to the Legal Metrology Fee Schedule.

Areas We Serve

UP Scales provides calibration, verification, and stamping services in the following locations:

Ghaziabad

UP Scales: 3rd-L/23, near Nehru Stadium, Nehru Nagar, Ghaziabad, Uttar Pradesh 201001
UP Scales: House No. 34, Rajbagh, Sahibabad, Ghaziabad, Uttar Pradesh 201005
UP Scales: C-83/8A, Govindpuram, Ghaziabad, Uttar Pradesh 201013
यूपी स्केल्स: Plot No. 356, Main Road Karhera, Mohan Nagar, Ghaziabad, Uttar Pradesh 201007

Noida

UP Scales: G-119, Ground Floor, Sector 22, Noida, Uttar Pradesh 201301
UP Scales: Flat No. 1802, Tower A, 6th Avenue, Gaur City, Sector 4, Greater Noida West, Greater Noida, Uttar Pradesh 201301

GT Road, Gautam Buddh Nagar

UP Scales: Balaji Mandir Marg, Opposite HDFC Bank, Nyayadar Ganj, GT Road, Gautam Buddh Nagar, Uttar Pradesh 203207

Delhi

UP Scales: B-158, Gali Number 6, Ashok Nagar, Shahdara, Nearest Shukar Bazar Chowk, Delhi 110093

Why Choose UP Scales?

Authorized Service Provider: UP Scales is an authorized service provider for the Legal Metrology Department, ensuring compliance with legal standards.
Expert Technicians: Our team of certified technicians has extensive experience in calibrating and verifying a wide range of measuring instruments.
State-of-the-Art Equipment: We use advanced calibration equipment to ensure the highest levels of accuracy and reliability.
Quick Turnaround Time: We understand the importance of minimizing downtime and offer fast and efficient services.
Comprehensive Certification: After calibration and verification, we provide a detailed calibration verification certificate and apply the Legal Metrology stamp, ensuring your instruments are legally compliant.

Legal metrology Department Uttar Pradesh

Conclusion

UP Scales is your trusted partner for the calibration, verification, and stamping of all types of measuring instruments, including water meters, bulk meters, CNG systems, and more. Whether you are in the water supply, oil and gas, transportation, or healthcare industry, our services ensure that your measuring instruments are accurate, reliable, and legally compliant. Contact UP Scales today to schedule your calibration and verification services.