Essae Load Cell Replacement Guide

The load cell is the primary sensing element in a weighing scale. Replacement may be required after overload, physical damage or water ingress.

Symptoms of Load Cell Failure
1.) Unstable readings.
2.) Under Flow Error.
3.) No Sensing Error.
4.) Incorrect weight display.
5.) Calibration failure.

Replacement Procedure
1.) Switch OFF power.
2.) Remove platform assembly.
3.) Disconnect load cell cable.
4.) Remove damaged load cell.
5.) Install new load cell.
6.) Reconnect wiring.
7.) Perform calibration.
8.) Verify accuracy.

Best Practice
Always use compatible load cells and certified calibration weights.