A&D JM Series Display Operation Guide

The JM Series display provides weight information and operating status indicators.

Display Indicators
1.) Weight value
2.) Zero indicator
3.) Stable indicator
4.) Low battery indicator
5.) Measurement unit (lb/kg)

Procedure
1.) Turn ON the scale.
2.) Wait until the display initializes.
3.) Verify the Zero indicator.
4.) Place the load on the platform.
5.) Wait until the Stable indicator appears.
6.) Read and record the displayed weight.

Best Practices
1.) Keep the display clean.
2.) Avoid direct sunlight.
3.) Ensure stable readings before recording measurements.
4.) Replace batteries when the low battery indicator appears.