A&D HD Series Installation Guide

The A&D HD Series counting scale should be installed on a stable surface to ensure accurate weighing and counting performance.

Procedure
1.) Place the scale on a rigid and level table.
2.) Adjust the leveling feet until the spirit level is centered.
3.) Avoid vibration and direct sunlight.
4.) Connect the supplied AC adapter.
5.) Allow the scale to warm up before use.
6.) Verify zero indication before weighing.

Best Practices
1.) Keep away from electrical noise.
2.) Operate between recommended temperatures.
3.) Clean the weighing pan regularly.
4.) Use only the original power adapter.