STABILITY ERROR
Unstable Weight Reading
STABILITY ERROR occurs when the balance cannot obtain a stable weighing value.
Possible Causes
• Air movement around the balance.
• Table vibration.
• Improper leveling.
• Unstable power supply.
• Draft shield left open.
• Electromagnetic interference.
Troubleshooting Steps
1. Place the balance on a solid and vibration-free surface.
2. Close all draft shields.
3. Check that the leveling bubble is centered.
4. Remove nearby fans or air conditioning airflow.
5. Wait until the stability indicator appears before recording weight.
6. Restart the balance if the problem continues.
Preventive Tips
• Install the balance in a temperature-controlled environment.
• Calibrate the balance regularly.
• Keep the weighing chamber clean.
Possible Causes
• Air movement around the balance.
• Table vibration.
• Improper leveling.
• Unstable power supply.
• Draft shield left open.
• Electromagnetic interference.
Troubleshooting Steps
1. Place the balance on a solid and vibration-free surface.
2. Close all draft shields.
3. Check that the leveling bubble is centered.
4. Remove nearby fans or air conditioning airflow.
5. Wait until the stability indicator appears before recording weight.
6. Restart the balance if the problem continues.
Preventive Tips
• Install the balance in a temperature-controlled environment.
• Calibrate the balance regularly.
• Keep the weighing chamber clean.
Is your scale beyond repair?
Sometimes replacing an aging machine is more cost-effective than fixing it. Explore our wide range of new, high-precision weighing scales.