Essae SI-810 Network Communication Error
NETWORK COMMUNICATION ERROR
Network Communication Error occurs when the SI-810 software cannot communicate with machines connected through the network.
Possible Causes
1.) Network cable disconnected.
2.) Incorrect IP address.
3.) Firewall restrictions.
4.) Switch or router failure.
5.) Machine unavailable.
Troubleshooting Procedure
1.) Verify network connection.
2.) Confirm IP configuration.
3.) Ping the target machine.
4.) Check firewall settings.
5.) Restart network equipment if required.
6.) Retry communication.
Prevention
1.) Maintain a stable network.
2.) Document IP addresses.
3.) Monitor network hardware regularly.
Possible Causes
1.) Network cable disconnected.
2.) Incorrect IP address.
3.) Firewall restrictions.
4.) Switch or router failure.
5.) Machine unavailable.
Troubleshooting Procedure
1.) Verify network connection.
2.) Confirm IP configuration.
3.) Ping the target machine.
4.) Check firewall settings.
5.) Restart network equipment if required.
6.) Retry communication.
Prevention
1.) Maintain a stable network.
2.) Document IP addresses.
3.) Monitor network hardware regularly.
Is your scale beyond repair?
Sometimes replacing an aging machine is more cost-effective than fixing it. Explore our wide range of new, high-precision weighing scales.
Related Error Codes
Related Calibration Guides