Essae SI-810 Communication Timeout Error
COMMUNICATION TIMEOUT
Communication Timeout Error indicates that the software did not receive a response from the connected SI-810 machine within the expected time.
Possible Causes
1.) Machine powered OFF.
2.) Communication cable disconnected.
3.) Network delay.
4.) Incorrect communication settings.
Troubleshooting Procedure
1.) Verify machine power.
2.) Check communication cable.
3.) Verify COM port or IP settings.
4.) Restart communication.
5.) Repeat the operation.
Prevention
1.) Inspect cables regularly.
2.) Maintain reliable network connectivity.
Possible Causes
1.) Machine powered OFF.
2.) Communication cable disconnected.
3.) Network delay.
4.) Incorrect communication settings.
Troubleshooting Procedure
1.) Verify machine power.
2.) Check communication cable.
3.) Verify COM port or IP settings.
4.) Restart communication.
5.) Repeat the operation.
Prevention
1.) Inspect cables regularly.
2.) Maintain reliable network connectivity.
Is your scale beyond repair?
Sometimes replacing an aging machine is more cost-effective than fixing it. Explore our wide range of new, high-precision weighing scales.
Related Error Codes
Related Calibration Guides