Essae Over Flow Error
OVER FLOW
Over Flow Error occurs when the load exceeds the maximum capacity of the weighing system.
Affected Models
1.) DX Series
2.) DS Series
3.) DC Series
4.) SI Series
Possible Causes
1.) Excessive load.
2.) Incorrect capacity setting.
3.) Load cell overload.
4.) Calibration mismatch.
Troubleshooting Procedure
1.) Remove excess load.
2.) Verify scale capacity.
3.) Restart indicator.
4.) Verify calibration settings.
5.) Test with standard weight.
Prevention
1.) Never exceed rated capacity.
2.) Load platform carefully.
3.) Verify capacity settings.
Affected Models
1.) DX Series
2.) DS Series
3.) DC Series
4.) SI Series
Possible Causes
1.) Excessive load.
2.) Incorrect capacity setting.
3.) Load cell overload.
4.) Calibration mismatch.
Troubleshooting Procedure
1.) Remove excess load.
2.) Verify scale capacity.
3.) Restart indicator.
4.) Verify calibration settings.
5.) Test with standard weight.
Prevention
1.) Never exceed rated capacity.
2.) Load platform carefully.
3.) Verify capacity settings.
Is your scale beyond repair?
Sometimes replacing an aging machine is more cost-effective than fixing it. Explore our wide range of new, high-precision weighing scales.
Related Error Codes
Related Calibration Guides
