Essae No Sensing Error
NO SENSING
No Sensing Error indicates that the indicator cannot detect a valid signal from the load cell.
Possible Causes
1.) Load cell disconnected.
2.) Damaged cable.
3.) Faulty connector.
4.) Load cell failure.
5.) Indicator input failure.
Troubleshooting Procedure
1.) Switch OFF the scale.
2.) Inspect all wiring.
3.) Check connector condition.
4.) Verify load cell resistance.
5.) Restart indicator.
6.) Perform calibration verification.
Prevention
1.) Protect connectors from moisture.
2.) Inspect wiring regularly.
3.) Avoid cable strain.
Possible Causes
1.) Load cell disconnected.
2.) Damaged cable.
3.) Faulty connector.
4.) Load cell failure.
5.) Indicator input failure.
Troubleshooting Procedure
1.) Switch OFF the scale.
2.) Inspect all wiring.
3.) Check connector condition.
4.) Verify load cell resistance.
5.) Restart indicator.
6.) Perform calibration verification.
Prevention
1.) Protect connectors from moisture.
2.) Inspect wiring regularly.
3.) Avoid cable strain.
Is your scale beyond repair?
Sometimes replacing an aging machine is more cost-effective than fixing it. Explore our wide range of new, high-precision weighing scales.
Related Error Codes
Related Calibration Guides
