Essae Load Cell Error
LOAD CELL ERROR
Load Cell Error indicates abnormal signal generation from the weighing sensor.
Possible Causes
1.) Damaged load cell.
2.) Water ingress.
3.) Mechanical overload.
4.) Broken cable.
5.) Junction box issue.
Troubleshooting Procedure
1.) Inspect load cell physically.
2.) Verify cable condition.
3.) Check junction box.
4.) Measure excitation voltage.
5.) Measure output signal.
6.) Replace faulty load cell if required.
Prevention
1.) Avoid overloading.
2.) Protect against water.
3.) Perform periodic inspection.
Possible Causes
1.) Damaged load cell.
2.) Water ingress.
3.) Mechanical overload.
4.) Broken cable.
5.) Junction box issue.
Troubleshooting Procedure
1.) Inspect load cell physically.
2.) Verify cable condition.
3.) Check junction box.
4.) Measure excitation voltage.
5.) Measure output signal.
6.) Replace faulty load cell if required.
Prevention
1.) Avoid overloading.
2.) Protect against water.
3.) Perform periodic inspection.
Is your scale beyond repair?
Sometimes replacing an aging machine is more cost-effective than fixing it. Explore our wide range of new, high-precision weighing scales.
Related Error Codes
Related Calibration Guides
