Essae DX-451 Under Flow Error

Under Flow Error occurs when the load cell signal falls below the allowable operating range.

Possible Causes
1.) Load cell connection issue.
2.) Damaged load cell cable.
3.) Excessive upward force on the platform.
4.) Mechanical obstruction.
5.) Internal electronic fault.

Troubleshooting Procedure

Step 1
Remove all loads.

Step 2
Inspect platform movement.

Step 3
Check load cell cable condition.

Step 4
Verify load cell connections.

Step 5
Restart the machine.

Step 6
Perform calibration verification.

Step 7
Contact authorized service if the error persists.

Prevention
1.) Avoid pulling upward on the platform.
2.) Protect load cell cables.
3.) Follow correct loading practices.