Essae DX-451 No Sensing Error

The indicator is unable to detect a valid signal from the load cell.

Possible Causes
1.) Load cell disconnected.
2.) Broken load cell cable.
3.) Loose terminal connections.
4.) Load cell damage.
5.) Internal electronics fault.

Troubleshooting Procedure

Step 1
Switch OFF the machine.

Step 2
Inspect load cell cable.

Step 3
Check terminal connections.

Step 4
Verify load cell condition.

Step 5
Restart the indicator.

Step 6
Perform calibration verification.

Step 7
Contact authorized Essae service if required.

Prevention
1.) Protect cables from damage.
2.) Avoid excessive platform impact.
3.) Inspect connections periodically.