Under flow
Under flow - Platter or Load Cell Issue
⚙️ Model Compatibility: Essae DS-450, DS-450SS, DS-451, and DS-451 Flame Proof[cite: 6].
The "Under flow" error happens when there is an obstruction or disconnection under the weighing pan, causing the scale to read below its calibrated zero point[cite: 6].
Troubleshooting Steps:
1. Check if any foreign material is touching the platform and pushing against the load cell[cite: 6]. Remove any foreign material found[cite: 6].
2. Ensure the machine platter is not lifted and fix the platter firmly in its designated position[cite: 6].
3. Verify that the load cell connection is not discarded, loose, or severed[cite: 6]. Check the cable of the load cell and connect it properly[cite: 6].
The "Under flow" error happens when there is an obstruction or disconnection under the weighing pan, causing the scale to read below its calibrated zero point[cite: 6].
Troubleshooting Steps:
1. Check if any foreign material is touching the platform and pushing against the load cell[cite: 6]. Remove any foreign material found[cite: 6].
2. Ensure the machine platter is not lifted and fix the platter firmly in its designated position[cite: 6].
3. Verify that the load cell connection is not discarded, loose, or severed[cite: 6]. Check the cable of the load cell and connect it properly[cite: 6].
Is your scale beyond repair?
Sometimes replacing an aging machine is more cost-effective than fixing it. Explore our wide range of new, high-precision weighing scales.
Related Error Codes
Related Calibration Guides
