Essae DS-215N Under Load Error
UNDER LOAD
Under Load Error indicates the load cell signal has fallen below the acceptable operating range.
Possible Causes
1.) Load cell disconnected.
2.) Broken load cell cable.
3.) Excessive upward force on platform.
4.) Load cell damage.
5.) Internal electronics fault.
Troubleshooting Procedure
1.) Remove all loads.
2.) Inspect load cell cable.
3.) Check load cell connections.
4.) Verify platform movement.
5.) Restart the indicator.
6.) Perform calibration verification.
Prevention
1.) Protect load cell cables.
2.) Avoid pulling upward on platform.
3.) Perform regular inspections.
Possible Causes
1.) Load cell disconnected.
2.) Broken load cell cable.
3.) Excessive upward force on platform.
4.) Load cell damage.
5.) Internal electronics fault.
Troubleshooting Procedure
1.) Remove all loads.
2.) Inspect load cell cable.
3.) Check load cell connections.
4.) Verify platform movement.
5.) Restart the indicator.
6.) Perform calibration verification.
Prevention
1.) Protect load cell cables.
2.) Avoid pulling upward on platform.
3.) Perform regular inspections.
Is your scale beyond repair?
Sometimes replacing an aging machine is more cost-effective than fixing it. Explore our wide range of new, high-precision weighing scales.
Related Error Codes
Related Calibration Guides
