Essae DS-215N Power Fail Retain Error
PF RET ERROR
Power Fail Retain Error occurs when the indicator fails to restore retained weight or settings after power restoration.
Possible Causes
1.) Power fail retain disabled.
2.) Memory corruption.
3.) Incorrect specification settings.
4.) Internal memory fault.
5.) Software configuration issue.
Troubleshooting Procedure
1.) Verify Power Fail Retain settings.
2.) Check specification parameters.
3.) Save settings again.
4.) Restart the indicator.
5.) Test power restoration operation.
6.) Reload default settings if necessary.
Prevention
1.) Verify retain function during maintenance.
2.) Save settings correctly before shutdown.
Possible Causes
1.) Power fail retain disabled.
2.) Memory corruption.
3.) Incorrect specification settings.
4.) Internal memory fault.
5.) Software configuration issue.
Troubleshooting Procedure
1.) Verify Power Fail Retain settings.
2.) Check specification parameters.
3.) Save settings again.
4.) Restart the indicator.
5.) Test power restoration operation.
6.) Reload default settings if necessary.
Prevention
1.) Verify retain function during maintenance.
2.) Save settings correctly before shutdown.
Is your scale beyond repair?
Sometimes replacing an aging machine is more cost-effective than fixing it. Explore our wide range of new, high-precision weighing scales.
Related Error Codes
Related Calibration Guides
