Essae DS-215N Load Cell Signal Error
LOAD CELL SIGNAL ERROR
This error occurs when the indicator receives an abnormal signal from the load cell.
Possible Causes
1.) Damaged load cell.
2.) Loose terminal connection.
3.) Moisture inside junction box.
4.) Cable damage.
5.) Indicator input circuit fault.
Troubleshooting Procedure
1.) Inspect load cell cable.
2.) Verify terminal connections.
3.) Check for moisture ingress.
4.) Measure load cell output.
5.) Replace faulty components if required.
6.) Recalibrate the system.
Prevention
1.) Protect cables.
2.) Keep junction box sealed.
3.) Perform preventive maintenance.
Possible Causes
1.) Damaged load cell.
2.) Loose terminal connection.
3.) Moisture inside junction box.
4.) Cable damage.
5.) Indicator input circuit fault.
Troubleshooting Procedure
1.) Inspect load cell cable.
2.) Verify terminal connections.
3.) Check for moisture ingress.
4.) Measure load cell output.
5.) Replace faulty components if required.
6.) Recalibrate the system.
Prevention
1.) Protect cables.
2.) Keep junction box sealed.
3.) Perform preventive maintenance.
Is your scale beyond repair?
Sometimes replacing an aging machine is more cost-effective than fixing it. Explore our wide range of new, high-precision weighing scales.
Related Error Codes
Related Calibration Guides
