Essae DS-215N Indicator Not Switching ON Error
POWER ON FAILURE
The indicator remains OFF when the power key is pressed.
Possible Causes
1.) No AC power supply.
2.) Battery fully discharged.
3.) Faulty charger.
4.) Loose power connection.
5.) Internal power supply fault.
6.) Main board failure.
Troubleshooting Procedure
1.) Verify AC power source.
2.) Check charger operation.
3.) Charge battery fully.
4.) Inspect power cable connections.
5.) Restart the indicator.
6.) Test with alternate power source.
7.) Contact authorized Essae service if required.
Prevention
1.) Maintain battery charge.
2.) Inspect power cables regularly.
3.) Protect the indicator from voltage fluctuations.
Possible Causes
1.) No AC power supply.
2.) Battery fully discharged.
3.) Faulty charger.
4.) Loose power connection.
5.) Internal power supply fault.
6.) Main board failure.
Troubleshooting Procedure
1.) Verify AC power source.
2.) Check charger operation.
3.) Charge battery fully.
4.) Inspect power cable connections.
5.) Restart the indicator.
6.) Test with alternate power source.
7.) Contact authorized Essae service if required.
Prevention
1.) Maintain battery charge.
2.) Inspect power cables regularly.
3.) Protect the indicator from voltage fluctuations.
Is your scale beyond repair?
Sometimes replacing an aging machine is more cost-effective than fixing it. Explore our wide range of new, high-precision weighing scales.
Related Error Codes
Related Calibration Guides
