Essae DS-215N Calibration Failed Error
CALIBRATION FAILED
Calibration Failed Error occurs when the indicator cannot complete the calibration process successfully.
Possible Causes
1.) Incorrect calibration weight.
2.) Unstable platform during calibration.
3.) Wrong capacity configuration.
4.) Load cell signal fluctuation.
5.) Electrical interference.
Troubleshooting Procedure
1.) Remove all loads.
2.) Verify calibration weight accuracy.
3.) Check capacity settings.
4.) Ensure stable platform conditions.
5.) Repeat calibration procedure.
6.) Verify load cell operation.
9.) Restart the indicator.
Prevention
1.) Use certified test weights.
2.) Avoid vibration during calibration.
3.) Maintain stable power supply.
Possible Causes
1.) Incorrect calibration weight.
2.) Unstable platform during calibration.
3.) Wrong capacity configuration.
4.) Load cell signal fluctuation.
5.) Electrical interference.
Troubleshooting Procedure
1.) Remove all loads.
2.) Verify calibration weight accuracy.
3.) Check capacity settings.
4.) Ensure stable platform conditions.
5.) Repeat calibration procedure.
6.) Verify load cell operation.
9.) Restart the indicator.
Prevention
1.) Use certified test weights.
2.) Avoid vibration during calibration.
3.) Maintain stable power supply.
Is your scale beyond repair?
Sometimes replacing an aging machine is more cost-effective than fixing it. Explore our wide range of new, high-precision weighing scales.
Related Error Codes
Related Calibration Guides
