Essae DC-85N Under Flow Error
UNDER FLOW
Under Flow Error indicates that the load cell signal is below the acceptable operating range.
Possible Causes
1.) Load cell disconnected.
2.) Broken cable.
3.) Excessive upward force.
4.) Load cell damage.
5.) Connector failure.
Troubleshooting Procedure
1.) Remove all loads.
2.) Inspect load cell cable.
3.) Check terminal connections.
4.) Verify load cell output.
5.) Restart the scale.
6.) Recalibrate if required.
Prevention
1.) Avoid pulling upward on platform.
2.) Protect cables from damage.
3.) Perform preventive maintenance.
Possible Causes
1.) Load cell disconnected.
2.) Broken cable.
3.) Excessive upward force.
4.) Load cell damage.
5.) Connector failure.
Troubleshooting Procedure
1.) Remove all loads.
2.) Inspect load cell cable.
3.) Check terminal connections.
4.) Verify load cell output.
5.) Restart the scale.
6.) Recalibrate if required.
Prevention
1.) Avoid pulling upward on platform.
2.) Protect cables from damage.
3.) Perform preventive maintenance.
Is your scale beyond repair?
Sometimes replacing an aging machine is more cost-effective than fixing it. Explore our wide range of new, high-precision weighing scales.
Related Error Codes
Related Calibration Guides
