Essae DC-85N Display Reading Not Stable
UNSTABLE DISPLAY
The displayed weight continuously changes even when the load remains unchanged.
Possible Causes
1.) Vibration.
2.) Air movement.
3.) Improper installation.
4.) Load cell instability.
5.) Electrical interference.
Troubleshooting Procedure
1.) Remove all loads.
2.) Check platform movement.
3.) Move away from fans.
4.) Verify grounding.
5.) Perform test weighing.
6.) Verify calibration status.
7.) Restart the scale.
Prevention
1.) Install on stable surface.
2.) Avoid vibration.
3.) Perform periodic calibration.
Possible Causes
1.) Vibration.
2.) Air movement.
3.) Improper installation.
4.) Load cell instability.
5.) Electrical interference.
Troubleshooting Procedure
1.) Remove all loads.
2.) Check platform movement.
3.) Move away from fans.
4.) Verify grounding.
5.) Perform test weighing.
6.) Verify calibration status.
7.) Restart the scale.
Prevention
1.) Install on stable surface.
2.) Avoid vibration.
3.) Perform periodic calibration.
Is your scale beyond repair?
Sometimes replacing an aging machine is more cost-effective than fixing it. Explore our wide range of new, high-precision weighing scales.
Related Error Codes
Related Calibration Guides
