Essae AX Series Zero Drift Error
ZERO DRIFT
Zero Drift Error occurs when the balance display changes even though nothing is placed on the weighing pan.
Possible Causes
1.) Temperature variation.
2.) Air movement.
3.) Static electricity.
4.) Dust on the weighing pan.
5.) Improper installation.
6.) Load receptor obstruction.
Troubleshooting Procedure
1.) Remove any object from the pan.
2.) Clean the weighing chamber.
3.) Press the ZERO key.
4.) Verify leveling.
5.) Allow the balance to stabilize.
6.) Perform calibration verification.
Prevention
1.) Keep the weighing chamber clean.
2.) Avoid environmental disturbances.
3.) Perform periodic maintenance.
Possible Causes
1.) Temperature variation.
2.) Air movement.
3.) Static electricity.
4.) Dust on the weighing pan.
5.) Improper installation.
6.) Load receptor obstruction.
Troubleshooting Procedure
1.) Remove any object from the pan.
2.) Clean the weighing chamber.
3.) Press the ZERO key.
4.) Verify leveling.
5.) Allow the balance to stabilize.
6.) Perform calibration verification.
Prevention
1.) Keep the weighing chamber clean.
2.) Avoid environmental disturbances.
3.) Perform periodic maintenance.
Is your scale beyond repair?
Sometimes replacing an aging machine is more cost-effective than fixing it. Explore our wide range of new, high-precision weighing scales.
Related Error Codes
Related Calibration Guides
