Essae AX Series Incorrect Weight Display Error
INCORRECT WEIGHT DISPLAY
The displayed weight differs from the expected value or from a known reference weight.
Possible Causes
1.) Calibration required.
2.) Balance not levelled.
3.) Environmental vibration.
4.) Incorrect weighing unit selected.
5.) Overloaded or damaged weighing pan.
6.) External interference.
Troubleshooting Procedure
1.) Verify the weighing unit.
2.) Check the level indicator.
3.) Perform calibration verification.
4.) Test with a certified calibration weight.
5.) Remove vibration sources.
6.) Repeat the measurement.
Prevention
1.) Calibrate the balance regularly.
2.) Verify the weighing unit before use.
3.) Keep the installation surface stable.
Possible Causes
1.) Calibration required.
2.) Balance not levelled.
3.) Environmental vibration.
4.) Incorrect weighing unit selected.
5.) Overloaded or damaged weighing pan.
6.) External interference.
Troubleshooting Procedure
1.) Verify the weighing unit.
2.) Check the level indicator.
3.) Perform calibration verification.
4.) Test with a certified calibration weight.
5.) Remove vibration sources.
6.) Repeat the measurement.
Prevention
1.) Calibrate the balance regularly.
2.) Verify the weighing unit before use.
3.) Keep the installation surface stable.
Is your scale beyond repair?
Sometimes replacing an aging machine is more cost-effective than fixing it. Explore our wide range of new, high-precision weighing scales.
Related Error Codes
Related Calibration Guides
