Essae AX Series Draft Shield Error
DRAFT SHIELD ERROR
Draft Shield Error refers to weighing instability caused by incorrect use, damage or obstruction of the draft shield.
Possible Causes
1.) Draft shield door left open.
2.) Improper assembly.
3.) Glass panel obstruction.
4.) Air entering the weighing chamber.
5.) Damaged draft shield components.
Troubleshooting Procedure
1.) Close all draft shield doors.
2.) Verify correct assembly.
3.) Remove any obstruction.
4.) Clean the glass panels.
5.) Repeat the weighing operation.
6.) Replace damaged components if required.
Prevention
1.) Keep doors closed during weighing.
2.) Clean the draft shield regularly.
3.) Avoid placing objects against the glass panels.
Possible Causes
1.) Draft shield door left open.
2.) Improper assembly.
3.) Glass panel obstruction.
4.) Air entering the weighing chamber.
5.) Damaged draft shield components.
Troubleshooting Procedure
1.) Close all draft shield doors.
2.) Verify correct assembly.
3.) Remove any obstruction.
4.) Clean the glass panels.
5.) Repeat the weighing operation.
6.) Replace damaged components if required.
Prevention
1.) Keep doors closed during weighing.
2.) Clean the draft shield regularly.
3.) Avoid placing objects against the glass panels.
Is your scale beyond repair?
Sometimes replacing an aging machine is more cost-effective than fixing it. Explore our wide range of new, high-precision weighing scales.
Related Error Codes
Related Calibration Guides
