Essae AX Series Display Not Working Error
DISPLAY FAILURE
Display Not Working Error occurs when the display remains blank, partially visible or fails to update correctly.
Possible Causes
1.) Power supply issue.
2.) Loose display connector.
3.) Internal display failure.
4.) Main PCB fault.
5.) Electrical surge damage.
Troubleshooting Procedure
1.) Verify the AC adapter.
2.) Restart the balance.
3.) Inspect the display brightness.
4.) Check display cable connections.
5.) Test the balance using another power outlet.
6.) Contact authorized service if required.
Prevention
1.) Use a stable power supply.
2.) Protect the balance from voltage fluctuations.
3.) Keep connectors clean and secure.
Possible Causes
1.) Power supply issue.
2.) Loose display connector.
3.) Internal display failure.
4.) Main PCB fault.
5.) Electrical surge damage.
Troubleshooting Procedure
1.) Verify the AC adapter.
2.) Restart the balance.
3.) Inspect the display brightness.
4.) Check display cable connections.
5.) Test the balance using another power outlet.
6.) Contact authorized service if required.
Prevention
1.) Use a stable power supply.
2.) Protect the balance from voltage fluctuations.
3.) Keep connectors clean and secure.
Is your scale beyond repair?
Sometimes replacing an aging machine is more cost-effective than fixing it. Explore our wide range of new, high-precision weighing scales.
Related Error Codes
Related Calibration Guides
