bAtt
Battery Low Error
The "bAtt" message indicates that the battery voltage has dropped below the recommended operating level.
Possible Causes
1.) Weak batteries
2.) Batteries reaching end of life
3.) Extended portable operation
4.) Low supply voltage
Troubleshooting
1.) Turn OFF the scale.
2.) Replace all batteries with new ones.
3.) If using rechargeable batteries, fully recharge them.
4.) Restart the scale.
5.) Verify that the error message disappears.
Prevention
1.) Replace batteries as a complete set.
2.) Remove batteries during long-term storage.
3.) Use high-quality alkaline batteries for longer operating life.
Possible Causes
1.) Weak batteries
2.) Batteries reaching end of life
3.) Extended portable operation
4.) Low supply voltage
Troubleshooting
1.) Turn OFF the scale.
2.) Replace all batteries with new ones.
3.) If using rechargeable batteries, fully recharge them.
4.) Restart the scale.
5.) Verify that the error message disappears.
Prevention
1.) Replace batteries as a complete set.
2.) Remove batteries during long-term storage.
3.) Use high-quality alkaline batteries for longer operating life.
Is your scale beyond repair?
Sometimes replacing an aging machine is more cost-effective than fixing it. Explore our wide range of new, high-precision weighing scales.