Err
Density Measurement Error
The balance cannot complete density measurement because required parameters or accessories are missing.
Possible Causes
1.) Incorrect density setup
2.) Missing immersion fixture
3.) Unstable sample
4.) Invalid measurement sequence
Solution
1.) Verify density kit installation.
2.) Restart density mode.
3.) Repeat measurement.
4.) Check sample stability.
5.) Perform calibration before testing.
Possible Causes
1.) Incorrect density setup
2.) Missing immersion fixture
3.) Unstable sample
4.) Invalid measurement sequence
Solution
1.) Verify density kit installation.
2.) Restart density mode.
3.) Repeat measurement.
4.) Check sample stability.
5.) Perform calibration before testing.
Is your scale beyond repair?
Sometimes replacing an aging machine is more cost-effective than fixing it. Explore our wide range of new, high-precision weighing scales.